Agency information
- UL® 98 enclosed and dead-front switch - Guide WIAX, WIAX7 (Canada), File E182262
- cULus, NEMA® 1, UL 50, Listed enclosure cUL per Canadian Standards C22.2, No. 0-M91-CAN/ CSA® C22.2, No. 4-M89 enclosed switch
- U.B.C. and C.B.C. seismic qualified, and I.B.C. approved
Features:
- 30-400 amp 600Vac 3-phase fused power switch
- 200kA RMS Short-Circuit Current Rating (SCCR)
- Shunt trip 120V
- Fire safety interface relay
- Fire alarm voltage monitoring relay (to monitor shunt trip voltage)
- Ground lug
- Class J fuse mounting only1
- Mechanically interlocked auxiliary contacts for hydraulic elevators with battery backup
(5 amp 120Vac rated)
Options:
• Control power transformer with fuses and blocks
• Key to test switch
• Pilot light – “ON”
• Isolated neutral lug2
• NEMA 3R, 4, and 12 enclosures
For added protection, use the Bussmann series SAMITM fuse covers3 to improve electrical safety [OSHA 1910.335(A)(2)(ii)]. See data sheet
no. 1204.
1 Class J fuses not included.
2 Oversized 200% rated neutral option available where
required by excessive non-linear loads. 3 Covers available up to 100A.
Description:
Eaton Bussmann® series Quik-SpecTM Power Module Switch is an all-in-one elevator disconnect switch available in configurations to meet virtually any single elevator shutdown and disconnect requirement.
Speci cations:
Ratings
- Volts - 208, 240, 480, 600Vac
- Amps - 30, 60, 100, 200, 400
- SCCR - 200kA RMS